King upholstered sleigh bed – Save money on decor in your bedroom by reorienting your platform bed. Pollster headboard, step board (if your bed has one) and platform base by adding the fabric a project that allows you to customize the look of your room by choosing clothes that fit your interior. Choose from a wide selection of colors and textures. Take measurements of the length and width of your headboard, foot park and platform base. You can also choose to cover only the headboard and the board and paint the platform to match, or just cover the headboard and paint the leveling board. Buy foam at least 2 inches thick, call the store before time to have foam cut to the size of the surface you plan to cover. When buying sheet ware and fabric, add 12 inches to length and width so you have enough to wrap the boards.
The same applies to the fabric: Add 12 inches to length and width. Lay the fabric king upholstered sleigh bed face down on the floor, then place batting on the fabric. Add the third layer of foam. Lay the headboard on top of the pile. (You should now have all four layers on top of each other, starting with the fabric face down on the floor and ending with the headboard down on the fabric, sheet wash and foam.) Line up foam and headboard so that no overlap occurs. The fabric and fur should have a 6-inch overlap and the main body should be centered in the middle.
Begin to secure the fabric, plate wash and foam sandwich on the back of the headboard using short gun. Start stapling on the opposite sides of the board to keep the fabric from wrinkles and glides. Keep fabric as tight as possible and shorten all layers to the back of the board. Short with 1/4 inch staples each 2 inches. Turn the headboard king upholstered sleigh bed as short as you pull the fabric tight to ensure smooth operation. If you make a mistake, just pull out staples and restart. Trim excess fabric with a scissors.